Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/2573
Nаziv: | Surface roughness and friction coefficient in IBAD deposited Tin Hard coating | Аutоri: | Kakaš D. Škorić, Branko Babić, Mladen Mitrović, Dušanka Miletić, Aleksandar Vilotić, Marko Terek, Pal Kovačević, Lazar |
Dаtum izdаvаnjа: | 1-јан-2009 | Čаsоpis: | FME Transactions | Sažetak: | © Faculty of Mechanical Engineering, Belgrade. Influence of surface roughness of TiN coatings on friction and wear phenomena was investigated. Wear and friction properties were evaluated by using CSM nanotribometer. Relatively low loads were used during testing, therefore wear depth was less than 20 % of TiN coating thickness. Obtained results show that TiN coatings of higher hardness and lower friction coefficient can be produced by IBAD comparing to TiN coatings deposited by industrial PVD. Scanning electron and atomic force microscopy provide detailed analysis of nanochanges of wear zone morphology. | URI: | https://open.uns.ac.rs/handle/123456789/2573 | ISSN: | 14512092 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
1
prоvеrеnо 22.02.2020.
Prеglеd/i stаnicа
56
Prоtеklа nеdеljа
16
16
Prоtеkli mеsеc
4
4
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.