Surface roughness and friction coefficient in IBAD deposited Tin Hard coating

Please use this identifier to cite or link to this item: https://open.uns.ac.rs/handle/123456789/2573

Title:	Surface roughness and friction coefficient in IBAD deposited Tin Hard coating
Authors:	Kakaš D. Škorić, Branko Babić, Mladen Mitrović, Dušanka Miletić, Aleksandar Vilotić, Marko Terek, Pal Kovačević, Lazar
Issue Date:	1-Jan-2009
Journal:	FME Transactions
Abstract:	© Faculty of Mechanical Engineering, Belgrade. Influence of surface roughness of TiN coatings on friction and wear phenomena was investigated. Wear and friction properties were evaluated by using CSM nanotribometer. Relatively low loads were used during testing, therefore wear depth was less than 20 % of TiN coating thickness. Obtained results show that TiN coatings of higher hardness and lower friction coefficient can be produced by IBAD comparing to TiN coatings deposited by industrial PVD. Scanning electron and atomic force microscopy provide detailed analysis of nanochanges of wear zone morphology.
URI:	https://open.uns.ac.rs/handle/123456789/2573
ISSN:	14512092
Appears in Collections:	FTN Publikacije/Publications

1

checked on Feb 22, 2020

54

Last Week
16

Last month
4

checked on May 3, 2024

Check