Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://open.uns.ac.rs/handle/123456789/2573
Назив: Surface roughness and friction coefficient in IBAD deposited Tin Hard coating
Аутори: Kakaš D.
Škorić, Branko 
Babić, Mladen 
Mitrović, Dušanka
Miletić, Aleksandar
Vilotić, Marko 
Terek, Pal 
Kovačević, Lazar 
Датум издавања: 1-јан-2009
Часопис: FME Transactions
Сажетак: © Faculty of Mechanical Engineering, Belgrade. Influence of surface roughness of TiN coatings on friction and wear phenomena was investigated. Wear and friction properties were evaluated by using CSM nanotribometer. Relatively low loads were used during testing, therefore wear depth was less than 20 % of TiN coating thickness. Obtained results show that TiN coatings of higher hardness and lower friction coefficient can be produced by IBAD comparing to TiN coatings deposited by industrial PVD. Scanning electron and atomic force microscopy provide detailed analysis of nanochanges of wear zone morphology.
URI: https://open.uns.ac.rs/handle/123456789/2573
ISSN: 14512092
Налази се у колекцијама:FTN Publikacije/Publications

Приказати целокупан запис ставки

SCOPUSTM   
Навођења

1
проверено 22.02.2020.

Преглед/и станица

56
Протекла недеља
16
Протекли месец
4
проверено 10.05.2024.

Google ScholarTM

Проверите


Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.