Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/10000
Nаziv: | The austempering study of alloyed ductile iron | Аutоri: | Erić O. Jovanović M. Šidanin L. Rajnović, Dragan Zec S. |
Dаtum izdаvаnjа: | 1-јан-2006 | Čаsоpis: | Materials and Design | Sažetak: | Austempered ductile iron (ADI) proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties can be achieved upon adequate heat treatment which yields optimum microstructure for a given chemical composition. In this paper an investigation has been conducted on ADI alloyed with 0.45%Cu and austempered in a range of times and temperatures. The microstructure and fracture mode developed throughout these treatments have been identified by means of light and scanning electron microscopy and X-ray diffraction analysis. It was shown that strength, elongation and impact energy strongly depend on amounts of bainitic ferrite and retained austenite. Based on these results an optimal processing window has been established. © 2004 Elsevier Ltd. All rights reserved. | URI: | https://open.uns.ac.rs/handle/123456789/10000 | ISSN: | 2641275 | DOI: | 10.1016/j.matdes.2004.11.028 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
53
prоvеrеnо 20.05.2023.
Prеglеd/i stаnicа
24
Prоtеklа nеdеljа
12
12
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.