Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/10000
Назив: | The austempering study of alloyed ductile iron | Аутори: | Erić O. Jovanović M. Šidanin L. Rajnović, Dragan Zec S. |
Датум издавања: | 1-јан-2006 | Часопис: | Materials and Design | Сажетак: | Austempered ductile iron (ADI) proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties can be achieved upon adequate heat treatment which yields optimum microstructure for a given chemical composition. In this paper an investigation has been conducted on ADI alloyed with 0.45%Cu and austempered in a range of times and temperatures. The microstructure and fracture mode developed throughout these treatments have been identified by means of light and scanning electron microscopy and X-ray diffraction analysis. It was shown that strength, elongation and impact energy strongly depend on amounts of bainitic ferrite and retained austenite. Based on these results an optimal processing window has been established. © 2004 Elsevier Ltd. All rights reserved. | URI: | https://open.uns.ac.rs/handle/123456789/10000 | ISSN: | 2641275 | DOI: | 10.1016/j.matdes.2004.11.028 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
53
проверено 20.05.2023.
Преглед/и станица
24
Протекла недеља
12
12
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.