Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/10000
Title: | The austempering study of alloyed ductile iron | Authors: | Erić O. Jovanović M. Šidanin L. Rajnović, Dragan Zec S. |
Issue Date: | 1-Jan-2006 | Journal: | Materials and Design | Abstract: | Austempered ductile iron (ADI) proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties can be achieved upon adequate heat treatment which yields optimum microstructure for a given chemical composition. In this paper an investigation has been conducted on ADI alloyed with 0.45%Cu and austempered in a range of times and temperatures. The microstructure and fracture mode developed throughout these treatments have been identified by means of light and scanning electron microscopy and X-ray diffraction analysis. It was shown that strength, elongation and impact energy strongly depend on amounts of bainitic ferrite and retained austenite. Based on these results an optimal processing window has been established. © 2004 Elsevier Ltd. All rights reserved. | URI: | https://open.uns.ac.rs/handle/123456789/10000 | ISSN: | 2641275 | DOI: | 10.1016/j.matdes.2004.11.028 |
Appears in Collections: | FTN Publikacije/Publications |
Show full item record
SCOPUSTM
Citations
53
checked on May 20, 2023
Page view(s)
24
Last Week
12
12
Last month
0
0
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.