Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/7541
Title: | Influence of substrate roughness on adhesion of TiN coatings | Authors: | Miletić, Aleksandar Terek, Pal Kovačević, Lazar Vilotić, Marko Kakaš D. Škorić, Branko Kukuruzović, Dragan |
Issue Date: | 1-Jan-2014 | Journal: | Journal of the Brazilian Society of Mechanical Sciences and Engineering | Abstract: | Titanium-nitride coatings were prepared by ion beam assisted deposition. In order to provide adequate adhesion between TiN films and steel substrates, ion beam mixing of Ti atoms with atoms of steel base was applied prior to deposition. The effect of substrate surface roughness on adhesion strength of TiN coatings was evaluated in this research. A scratch test was used to characterize the adhesive properties of the coatings. Optical microscopy was employed to examine scratch-induced channels, while atomic force microscopy was used to determine sample roughness prior and after the deposition of TiN coatings. It has been revealed that adhesion increases with increase in substrate roughness. © The Brazilian Society of Mechanical Sciences and Engineering 2013. | URI: | https://open.uns.ac.rs/handle/123456789/7541 | ISSN: | 16785878 | DOI: | 10.1007/s40430-013-0102-2 |
Appears in Collections: | FTN Publikacije/Publications |
Show full item record
SCOPUSTM
Citations
27
checked on May 3, 2024
Page view(s)
37
Last Week
8
8
Last month
0
0
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.