Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/7541
Nаziv: | Influence of substrate roughness on adhesion of TiN coatings | Аutоri: | Miletić, Aleksandar Terek, Pal Kovačević, Lazar Vilotić, Marko Kakaš D. Škorić, Branko Kukuruzović, Dragan |
Dаtum izdаvаnjа: | 1-јан-2014 | Čаsоpis: | Journal of the Brazilian Society of Mechanical Sciences and Engineering | Sažetak: | Titanium-nitride coatings were prepared by ion beam assisted deposition. In order to provide adequate adhesion between TiN films and steel substrates, ion beam mixing of Ti atoms with atoms of steel base was applied prior to deposition. The effect of substrate surface roughness on adhesion strength of TiN coatings was evaluated in this research. A scratch test was used to characterize the adhesive properties of the coatings. Optical microscopy was employed to examine scratch-induced channels, while atomic force microscopy was used to determine sample roughness prior and after the deposition of TiN coatings. It has been revealed that adhesion increases with increase in substrate roughness. © The Brazilian Society of Mechanical Sciences and Engineering 2013. | URI: | https://open.uns.ac.rs/handle/123456789/7541 | ISSN: | 16785878 | DOI: | 10.1007/s40430-013-0102-2 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
27
prоvеrеnо 03.05.2024.
Prеglеd/i stаnicа
37
Prоtеklа nеdеljа
8
8
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.