Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/7541
Назив: | Influence of substrate roughness on adhesion of TiN coatings | Аутори: | Miletić, Aleksandar Terek, Pal Kovačević, Lazar Vilotić, Marko Kakaš D. Škorić, Branko Kukuruzović, Dragan |
Датум издавања: | 1-јан-2014 | Часопис: | Journal of the Brazilian Society of Mechanical Sciences and Engineering | Сажетак: | Titanium-nitride coatings were prepared by ion beam assisted deposition. In order to provide adequate adhesion between TiN films and steel substrates, ion beam mixing of Ti atoms with atoms of steel base was applied prior to deposition. The effect of substrate surface roughness on adhesion strength of TiN coatings was evaluated in this research. A scratch test was used to characterize the adhesive properties of the coatings. Optical microscopy was employed to examine scratch-induced channels, while atomic force microscopy was used to determine sample roughness prior and after the deposition of TiN coatings. It has been revealed that adhesion increases with increase in substrate roughness. © The Brazilian Society of Mechanical Sciences and Engineering 2013. | URI: | https://open.uns.ac.rs/handle/123456789/7541 | ISSN: | 16785878 | DOI: | 10.1007/s40430-013-0102-2 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
27
проверено 03.05.2024.
Преглед/и станица
37
Протекла недеља
8
8
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.