Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/32499
Nаziv: | A Portable Device for Passive LC Sensors Readout with Low-Coupling Enhanced Sensitivity | Аutоri: | Mitar Simić Adrian K. Stavrakis Milan Radovanović Asif Iqbal Varun Jeoti Goran Stojanović |
Ključnе rеči: | Inductive coupling;multiple measurements;mutual inductance;passive LC sensor;telemetry;resonance detection;resonance frequency | Dаtum izdаvаnjа: | 17-дец-2022 | Izdаvаč: | IEEE | Prојеkаt: | STRENTEX | Čаsоpis: | IEEE Transactions on Instrumentation and Measurement | Sažetak: | Passive sensors composed of inductor L and capacitor C (LC sensors) have significant importance for applications where reliable wireless monitoring of temperature, pressure, relative humidity, strain, pH, etc. is needed. In this paper, we propose a method suitable for implementation on the portable device for wireless readout of LC sensors, which eliminates the need for costly and bulky laboratory equipment (impedance analyzers and vector network analyzers). Our approach is based on an electrical circuit of voltage divider formed by a primary inductor and a reference resistor. The resonant frequency of the LC sensor is detected from the processing of the measured voltage across the reference resistor. The readout device is realized in the form of a printed circuit board (PCB) compatible with the widely available Arduino™ boards. Wireless readout of the 10 LC tags with the proposed device and with the laboratory impedance analyzer, showed that, in frequency range 1 MHz-10 MHz, relative differences in estimated values are lower than 4%. The distinguishing feature of the presented method is its enhanced sensitivity in the case of very weak coupling between primary and sensing inductor, which was achieved using numerical differentiation approximation of the measured voltage across the reference resistor. An additional contribution of the proposed device is demonstrated with the simultaneous readout of multiple tags. Lastly, the proposed device was characterized with respect to the noise impact of the two power supply realizations (DC adapter and the battery). | URI: | https://open.uns.ac.rs/handle/123456789/32499 | ISSN: | 0018-9456 | DOI: | 10.1109/TIM.2022.3232089 | Prаvа: | Attribution-NonCommercial-NoDerivs 3.0 United States |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Dаtоtеkе u оvој stаvci:
Dаtоtеkа | Оpis | Vеličinа | Fоrmаt | |
---|---|---|---|---|
TIM3232089.pdf | 1.12 MB | Adobe PDF | Pоglеdајtе |
Prеglеd/i stаnicа
55
Prоtеklа nеdеljа
16
16
Prоtеkli mеsеc
6
6
prоvеrеnо 10.05.2024.
Prеuzimаnjе/а
33
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Оvа stаvkа је licеncirаnа pоd Krеаtivnа dоzvоlа grаđаnа