Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/32477
Nаziv: | Bioactive scaffold (sodium alginate)-g-(nHAp@SiO2@GO) for bone tissue engineering | Аutоri: | Muhammad Umar Aslam Khan Saiful Izwan Abd Razak Sarish Rehman Anwarul Hasan Saima Qureshi Goran Stojanović |
Ključnе rеči: | Biodegradation;Bone scaffold;Nanotechnology;Osteoconductivity;Tissue engineering;Biopolymer | Dаtum izdаvаnjа: | 23-сеп-2022 | Izdаvаč: | Elsevier | Prојеkаt: | GREENELIT | Čаsоpis: | International Journal of Biological Macromolecules | Sažetak: | Globally, people suffering from bone disorders are steadily increasing and bone tissue engineering is an advanced approach to treating fractured and defected bone tissues. In this study, we have prepared polymeric nanocomposite by free-radical polymerization from sodium alginate, hydroxyapatite, and silica with different GO amounts. The porous scaffolds were fabricated using the freeze drying technique. The structural, morphological, mechanical, and wetting investigation was conducted by Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscope, universal tensile machine, and water contact angle characterization techniques. The swelling, biodegradation, and water retention were also studied. The biological studies were performed (cell viability, cell adherence, proliferation, and mineralization) against osteoblast cell lines. Scaffolds have exhibited different pore morphology SAG-1 (pore size = 414.61 ± 56 μm and porosity = 81.45 ± 2.17 %) and SAG-4 (pore size = 195.97 ± 82 μm and porosity = 53.82 ± 2.45 %). They have different mechanical behavior as SAG-1 has the least compression strength and compression modulus 2.14 ± 2.35 and 16.51 ± 1.27 MPa. However, SAG-4 has maximum compression strength and compression modulus 13.67 ± 2.63 and 96.16 ± 1.97 MPa with wetting behavior 80.70◦ and 58.70◦, respectively. Similarly, SAG-1 exhibited the least and SAG-4 presented maximum apatite mineral formation, cell adherence, cell viability, and cell proliferation against mouse pre-osteoblast cell lines. The increased GO amount provides different multifunctional materials with different characteristics. Hence, the fabricated scaffolds could be potential scaffold materials to treat and regenerate fracture bone tissues in bone tissue engineering. | URI: | https://open.uns.ac.rs/handle/123456789/32477 | ISSN: | 0141-8130 | DOI: | https://doi.org/10.1016/j.ijbiomac.2022.09.153 | Prаvа: | Attribution-NonCommercial-NoDerivs 3.0 United States |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Dаtоtеkе u оvој stаvci:
Dаtоtеkа | Оpis | Vеličinа | Fоrmаt | |
---|---|---|---|---|
International Journal of Biological Macromolecule2.pdf | 359.78 kB | Adobe PDF | Pоglеdајtе |
Prеglеd/i stаnicа
32
Prоtеklа nеdеljа
0
0
Prоtеkli mеsеc
0
0
prоvеrеnо 15.03.2024.
Prеuzimаnjе/а
51
prоvеrеnо 15.03.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Оvа stаvkа је licеncirаnа pоd Krеаtivnа dоzvоlа grаđаnа