Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/2258
Назив: | Wear resistance of austempered pearlitic ductile iron | Аутори: | Ješić, Dušan Kovač, P. Plavšić, M. Šooš L. Sarjanovic D. |
Датум издавања: | 1-јан-2018 | Часопис: | Kovove Materialy | Сажетак: | © 2018 Kovove Materialy. All rights reserved. The influence of austempering temperature on tribological properties of austempered pearlitic ductile iron (ADI) was investigated. The as-cast ductile iron was subjected to heat treatments consisting of austenitization at 900°C followed by austempering at temperatures of 250, 300 and 350°C for 120 min. The austempered samples were subjected to abrasion and adhesion wear resistance tests using steel and ductile iron plates. The abrasive wear testing of the tribo-pair was undertaken with the sanding plate. The results of abrasion and adhesion wear resistance tests are presented, and the effect of austempering temperature is discussed. | URI: | https://open.uns.ac.rs/handle/123456789/2258 | ISSN: | 0023432X | DOI: | 10.4149/km-2018-6-415 |
Налази се у колекцијама: | Naučne i umetničke publikacije |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
2
проверено 20.11.2023.
Преглед/и станица
18
Протекла недеља
17
17
Протекли месец
0
0
проверено 03.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.