Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/18
Nаziv: | Testing of Tribological Properties of ADI | Аutоri: | Pavel K. Šuput, Borislav Dušan J. Marić, Dražen |
Dаtum izdаvаnjа: | 1-јан-2020 | Čаsоpis: | Lecture Notes in Networks and Systems | Sažetak: | © 2020, Springer Nature Switzerland AG. This experimental work consists of testing of isothermally improved specimens for wear process without lubrication. In the first part investigated was tribological properties on tribometer pin on disc made produced from ADI. Tested was loss of length and loss of mass of pin for different increasing number of revolutions. Both wear parameters were increasing with number of revolutions. In the second part this was accomplished by conducting face milling tests for a range of machining conditions. More specifically, the effects of cutting speed on tool life was tested. In the study was found that the machinability of ADI, in terms of tool life, degrades as the cutting speed increases. Tool wear progression in time cubic polynomial fit equations for workpiece ADI material. The Tool life equation developed by Taylor to quantify the relationship between cutting speed and tool life is determined as well. | URI: | https://open.uns.ac.rs/handle/123456789/18 | ISSN: | 23673370 | DOI: | 10.1007/978-3-030-18072-0_11 |
Nаlаzi sе u kоlеkciјаmа: | EF Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
1
prоvеrеnо 10.05.2024.
Prеglеd/i stаnicа
57
Prоtеklа nеdеljа
20
20
Prоtеkli mеsеc
0
0
prоvеrеnо 03.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.