Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/18
Назив: | Testing of Tribological Properties of ADI | Аутори: | Pavel K. Šuput, Borislav Dušan J. Marić, Dražen |
Датум издавања: | 1-јан-2020 | Часопис: | Lecture Notes in Networks and Systems | Сажетак: | © 2020, Springer Nature Switzerland AG. This experimental work consists of testing of isothermally improved specimens for wear process without lubrication. In the first part investigated was tribological properties on tribometer pin on disc made produced from ADI. Tested was loss of length and loss of mass of pin for different increasing number of revolutions. Both wear parameters were increasing with number of revolutions. In the second part this was accomplished by conducting face milling tests for a range of machining conditions. More specifically, the effects of cutting speed on tool life was tested. In the study was found that the machinability of ADI, in terms of tool life, degrades as the cutting speed increases. Tool wear progression in time cubic polynomial fit equations for workpiece ADI material. The Tool life equation developed by Taylor to quantify the relationship between cutting speed and tool life is determined as well. | URI: | https://open.uns.ac.rs/handle/123456789/18 | ISSN: | 23673370 | DOI: | 10.1007/978-3-030-18072-0_11 |
Налази се у колекцијама: | EF Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
1
проверено 10.05.2024.
Преглед/и станица
57
Протекла недеља
20
20
Протекли месец
0
0
проверено 03.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.