Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/18
Title: | Testing of Tribological Properties of ADI | Authors: | Pavel K. Šuput, Borislav Dušan J. Marić, Dražen |
Issue Date: | 1-Jan-2020 | Journal: | Lecture Notes in Networks and Systems | Abstract: | © 2020, Springer Nature Switzerland AG. This experimental work consists of testing of isothermally improved specimens for wear process without lubrication. In the first part investigated was tribological properties on tribometer pin on disc made produced from ADI. Tested was loss of length and loss of mass of pin for different increasing number of revolutions. Both wear parameters were increasing with number of revolutions. In the second part this was accomplished by conducting face milling tests for a range of machining conditions. More specifically, the effects of cutting speed on tool life was tested. In the study was found that the machinability of ADI, in terms of tool life, degrades as the cutting speed increases. Tool wear progression in time cubic polynomial fit equations for workpiece ADI material. The Tool life equation developed by Taylor to quantify the relationship between cutting speed and tool life is determined as well. | URI: | https://open.uns.ac.rs/handle/123456789/18 | ISSN: | 23673370 | DOI: | 10.1007/978-3-030-18072-0_11 |
Appears in Collections: | EF Publikacije/Publications |
Show full item record
SCOPUSTM
Citations
1
checked on May 10, 2024
Page view(s)
57
Last Week
20
20
Last month
0
0
checked on May 3, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.