Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/1811
Nаziv: | Study of the influence of the cutting temperature on the magnitude of the contact forces in the machining fixtures | Аutоri: | Cioatǎ V. Kiss I. Alexa V. Raţiu S. Racov, M. |
Dаtum izdаvаnjа: | 12-јан-2018 | Čаsоpis: | IOP Conference Series: Materials Science and Engineering | Sažetak: | © Published under licence by IOP Publishing Ltd. In the machining process, the workpieces are installed in machining fixtures in order to establish a strictly determined position with the cutting tool or its trajectory. During the cutting process, the weight of the workpiece, the forces and moments of inertia, cutting forces and moments, clamping forces, the heat released during the cutting process determine the contact forces between the locators and the workpiece. The magnitude of these forces is important because too large value can destroy the surface of the workpiece, and a too small value can cause the workpiece to slip on the locators or even the loss of the contact with the workpiece. Both situations must be avoided. The paper presents a study, realized with CAE software, regarding the influence of the cutting temperature on the magnitude of the contact forces in a machining fixture for the milling a rectangular workpiece. | URI: | https://open.uns.ac.rs/handle/123456789/1811 | ISSN: | 17578981 | DOI: | 10.1088/1757-899X/294/1/012072 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
5
prоvеrеnо 20.11.2023.
Prеglеd/i stаnicа
23
Prоtеklа nеdеljа
4
4
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.