Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/1811
Назив: | Study of the influence of the cutting temperature on the magnitude of the contact forces in the machining fixtures | Аутори: | Cioatǎ V. Kiss I. Alexa V. Raţiu S. Racov, M. |
Датум издавања: | 12-јан-2018 | Часопис: | IOP Conference Series: Materials Science and Engineering | Сажетак: | © Published under licence by IOP Publishing Ltd. In the machining process, the workpieces are installed in machining fixtures in order to establish a strictly determined position with the cutting tool or its trajectory. During the cutting process, the weight of the workpiece, the forces and moments of inertia, cutting forces and moments, clamping forces, the heat released during the cutting process determine the contact forces between the locators and the workpiece. The magnitude of these forces is important because too large value can destroy the surface of the workpiece, and a too small value can cause the workpiece to slip on the locators or even the loss of the contact with the workpiece. Both situations must be avoided. The paper presents a study, realized with CAE software, regarding the influence of the cutting temperature on the magnitude of the contact forces in a machining fixture for the milling a rectangular workpiece. | URI: | https://open.uns.ac.rs/handle/123456789/1811 | ISSN: | 17578981 | DOI: | 10.1088/1757-899X/294/1/012072 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
5
проверено 20.11.2023.
Преглед/и станица
23
Протекла недеља
4
4
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.