Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/15988
Назив: | Stress distribution within the specimen in cold forward extrusion of steel | Аутори: | Plančak, Miroslav | Датум издавања: | 1-јан-1990 | Часопис: | Journal of Materials Processing Tech. | Сажетак: | The visioplasticity method was applied to obtain the stress distribution within the workpiece volume in the process of cold forward extrusion of steel. All stress components as well as effective stress and strain and stress indicator β were determined. As a boundary condition necessary for the evaluation of stress components, radial stress measured by pin load cell on the container wall, was used. On the base of stress components material formability potential in forward extrusion was evaluated. © 1990. | URI: | https://open.uns.ac.rs/handle/123456789/15988 | ISSN: | 09240136 | DOI: | 10.1016/0924-0136(90)90199-5 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
1
проверено 09.09.2023.
Преглед/и станица
8
Протекла недеља
7
7
Протекли месец
0
0
проверено 03.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.