Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/14845
Nаziv: | Influence of different friction conditions on the process of cold backward extrusion of steel | Аutоri: | Plancak M. | Dаtum izdаvаnjа: | 1-јан-1992 | Čаsоpis: | Lubrication Science | Sažetak: | Backward extrusion of steel is a deformation process in which very high forces and tool pressures occur. Reduction of such high forces and tool pressures is possible by using an efficient lubricant. This paper describes an experimental investigation of the influence of different lubricants on the stress‐strain state within the workpiece volume as well as on the stressing of the die. Best results were obtained when a phosphate‐coated specimen was lubricated with MoS2. Copyright © 1992 John Wiley & Sons, Ltd | URI: | https://open.uns.ac.rs/handle/123456789/14845 | ISSN: | 09540075 | DOI: | 10.1002/ls.3010040406 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
Prеglеd/i stаnicа
9
Prоtеklа nеdеljа
5
5
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.