Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/14845
Назив: | Influence of different friction conditions on the process of cold backward extrusion of steel | Аутори: | Plancak M. | Датум издавања: | 1-јан-1992 | Часопис: | Lubrication Science | Сажетак: | Backward extrusion of steel is a deformation process in which very high forces and tool pressures occur. Reduction of such high forces and tool pressures is possible by using an efficient lubricant. This paper describes an experimental investigation of the influence of different lubricants on the stress‐strain state within the workpiece volume as well as on the stressing of the die. Best results were obtained when a phosphate‐coated specimen was lubricated with MoS2. Copyright © 1992 John Wiley & Sons, Ltd | URI: | https://open.uns.ac.rs/handle/123456789/14845 | ISSN: | 09540075 | DOI: | 10.1002/ls.3010040406 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
Преглед/и станица
9
Протекла недеља
5
5
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.