Showing results 77 to 96 of 376
< previous
next >
Issue Date | Title | Author(s) |
1-Oct-2016 | Decision making framework for decreasing the redundancy of air quality monitoring stations in Vojvodina Province (Serbia) | Vujic B.; Srdjevic Z.; Agarski, Boris ; Simunovic K. |
1-Dec-2010 | Defining a theoretical model of wear - caused failure of tool machine elements | Tadć B.; Vukelić, Đorđe ; Jeremić, Biljana |
2018 | Definitive screening design for the optimization of flexographic water-based cyan dye removal from aqueous solution by nZVI-induced Fenton process | Kecić V.; Prica Miljana ; Kerkez Djurdja ; Lužanin Ognjan ; Bečelić-Tomin Milena ; Tomašević Pilipović Dragana ; Leovac-Maćerak A. |
1-Jan-2012 | Deformation analysis during bi-metallic coining operations | Plancak M.; Hartley P.; Essa K.; Vilotić, Dragana; Movrin, Dejan ; Lužanin, Ognjan |
1-Jan-2014 | Dependence of interfacial heat transfer coefficient on casting surface temperature during solidification of Al-Si alloy castings cast in CO2 sand mold | Kovačević, Lazar ; Terek, Pal ; Miletić, Aleksandar; Kakaš D. |
1-Jul-2019 | Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc | Menicanin A.; Lukovic M.; Blaz N.; Movrin, Dejan ; Zivanov L. |
1-Jan-2012 | Design of casting blanks in CAPP system for parts of piston-cylinder assembly of internal combustion engines | Todić, Vladimir ; Tepić J.; Milošević M.; Lukić D.; Hadžistević, Miodrag |
1-Jan-2019 | Design of custom made prosthesis of the hip | Tabaković, Slobodan ; Zeljković, Milan ; Milojević, Zoran ; Živković, Aleksandar |
1-Jan-2013 | Determination of surface roughness and topography of dental resin-based nanocomposites using AFM analysis | Tijana Lainović ; Marko Vilotić ; Larisa Blažić ; Damir Kakaš; Dubravka Marković ; Aljoša Ivanišević |
15-May-2005 | Development of a programme system for data-point pre-processing in Reverse Engineering | Budak, Igor ; Hodolic J.; Sokovic M. |
1-Jul-2017 | Development of an expert system for the simulation model for casting metal substructure of a metal-ceramic crown design | Matin I.; Hadžistević, Miodrag ; Vukelić, Đorđe ; Potran M.; Brajlih T. |
1-Jan-2016 | Development of banded microstructure in 34CrNiMo6 steel | Nagode A.; Resnik A.; Bizjak M.; Kosec G.; Karpe B.; Budak, Igor ; Kosec B.; Zorc B. |
1-Jan-2019 | Development of expert system for the selection of 3d digitization method in tangible cultural heritage | Budak, Igor ; Santoši, Željko ; Stojaković, Vesna ; Korolija - Crkvenjakov, Daniela ; Obradović, Ratko ; Milošević, Mijodrag ; Šokac, Mario |
1-Dec-2017 | The Difference Between GUM and ISO/TC 15530-3 Method to Evaluate the Measurement Uncertainty of Flatness by a CMM | Štrbac, Branko ; Radlovački V.; Spasić-Jokić V.; Delić, Milan; Hadžistević, Miodrag |
1-Jan-2015 | Different Approaches in Uncertainty Evaluation for Measurement of Complex Surfaces Using Coordinate Measuring Machine | Vrba I.; Palencar R.; Hadžistević, Miodrag ; Štrbac, Branko ; Spasic-Jokic V.; Hodolic J. |
1-Jan-2019 | Dimensional errors in selective laser melting products related to different orientations and processing parameters | Pal, Magdolna; Kokol V.; Gubeljak N.; Hadžistević, Miodrag ; Hudak R.; Drstvensek I. |
1-Jan-2020 | Dual Phase Austempered Ductile Iron - The Material Revolution and Its Engineering Applications | Eric Cekic O.; Rajnović, Dragan ; Sidjanin L.; Janjatović, Petar ; Baloš, Sebastian |
1-Mar-2017 | A Ductile Fracture Criterion of Ti-6Al-4V at Room Temperature | Vilotić, Dragana; Movrin, Dejan ; Alexandrov S. |
16-Mar-2012 | Duplex hard coatings with aditional ion implantation | Škorić, Branko ; Kakaš D.; Favato G.; Miletić A.; Arsenović, Marko |
20-Jan-2018 | Eco-design of a low-cost adsorbent produced from waste cherry kernels | Vukelić, Đorđe ; Boškov, Novak ; Agarski, Boris ; Radonić, Jelena ; Budak, Igor ; Pap, Ištvan; Turk-Sekulić, Maja |