Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/9718
Назив: | A model for improving the flexographic printing plate making process | Аутори: | Novaković D. Dedijer, Sandra Poljaček S. |
Датум издавања: | 1-дец-2010 | Часопис: | Tehnicki Vjesnik | Сажетак: | Thermal development process of photopolymer printing plates is one of the newest technologies in the flexographic reproduction process. It is solely based on mechanical process and thus enables the elimination of the chemical processing and drying phase from the plate making process. Taking into account that chemical processing is one of the critical problems in standardization of the plate making process, thermal development process should ensure greater quality and stability in the plate making process. This paper evaluates the specific conditions in the plate making procedure based on thermal development. Testing of the back and main exposure duration of the photopolymer plates, as wellasduration of the thermal development, were the objects of this research. The thickness and hardness, as well as SEM analysis of the printing plates were performed. Characterization of the produced plates was made and new model for improving the production line of the observed flexographic plates was defined. | URI: | https://open.uns.ac.rs/handle/123456789/9718 | ISSN: | 13303651 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
Преглед/и станица
26
Протекла недеља
7
7
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.