Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/9536
Nаziv: | Experimental tooling for contact stress measurement in bulk metal forming processes | Аutоri: | Vilotić, Dragana Plančak M. |
Dаtum izdаvаnjа: | 1-дец-2011 | Čаsоpis: | Journal for Technology of Plasticity | Sažetak: | Knowledge of contact stresses in metal forming operations is essential not only for optimal die design, but also for theoretical and numerical analysis of the metal forming processes. Determination of contact stresses can be performed theoretically and experimentally. This paper presents a tool construction with built-in pin-load cells for experimental determination of contact stresses and friction coefficient at upsetting of prismatic specimen with cylindrical dies. This construction allows measurement of contact stresses in any point of the contact surface of specimen, due to adjustable location of pin-load cells. The adjustments are performed by turning cylindrical dies around its own axis in combination with the change of axial position of the specimen. Experimental determination of contact stresses in upsetting of Ck35 prismatic specimens using cylindrical tools was performed at the Laboratory for technology of plasticity, FTN Novi Sad. | URI: | https://open.uns.ac.rs/handle/123456789/9536 | DOI: | 10.2478/v10211-011-0004-1 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
1
prоvеrеnо 20.11.2023.
Prеglеd/i stаnicа
2
Prоtеklа nеdеljа
1
1
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.