Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/8985
Назив: | Various designs of meander inductor and their influence on LC resonant displacement sensor | Аутори: | Blaž N. Mišković G. Marić, Andrea Damnjanović, Mirjana Radosavljević G. Zivanov L. |
Датум издавања: | 24-апр-2013 | Часопис: | Key Engineering Materials | Сажетак: | This paper deals with various configurations of meander inductor and their influence on characteristics of passive LC displacement sensor. Passive techniques use LC resonator to measure the parameters of interest remotely without an on-board power supply. Developed LC sensor comprises a fixed meander inductor and a movable module of mender inductor - interdigital capacitor resonant circuit, thereby causing the sensor resonant frequency to be displacement-dependent. The inductor and sensor circuits have been fabricated in PCB technology. The main goal was to find the optimal position for measurement connection pads on fixed meander inductor PCB as well as position of connection line between mender inductor and interdigital capacitor on PCB board with LC circuit. Measurements were realized on Impedance Analyzer (HP4191A) in frequency range from 10 MHz to 30 MHz, with 100 kHz step for each configuration of meander inductor. As results of these measurements the best configuration and the best sensor sensitivity for both mender inductors was determined. © (2013) Trans Tech Publications. | URI: | https://open.uns.ac.rs/handle/123456789/8985 | ISBN: | 9783037856161 | ISSN: | 10139826 | DOI: | 10.4028/www.scientific.net/KEM.543.235 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
Преглед/и станица
19
Протекла недеља
7
7
Протекли месец
2
2
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.