Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/8953
Назив: | The machinability of nickel-based alloys in high-pressure jet assisted (HPJA) turning | Аутори: | Kramar D. Sekulić, Mirjana Jurković Z. Kopač J. |
Датум издавања: | 6-мај-2013 | Часопис: | Metalurgija | Сажетак: | Due to their mechanical, thermal and chemical properties, nickel-based alloys are generally included among materials that are hard to machine. An experimental study has been performed to investigate the capabilities of conventional and high-pressure jet assisted (HPJA) turning of hard-to-machine materials, namely Inconel 718. The capabilities of different hard turning procedures are compared by means of chip breakability. The obtained results show that HPJA method offers a significant increase in chip breakability, under the same cutting conditions (cutting speed, feed rate, depth of cut). | URI: | https://open.uns.ac.rs/handle/123456789/8953 | ISSN: | 05435846 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
9
проверено 22.02.2020.
Преглед/и станица
32
Протекла недеља
2
2
Протекли месец
1
1
проверено 10.05.2024.
Google ScholarTM
Проверите
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.