Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/8607
Назив: | Tuning methods for PI controller - Comparison on a highly modular drive | Аутори: | Popadić, Bane Dumnić, Boris Milićević, Dragan Katić, Vladimir Čorba, Zoltan |
Датум издавања: | 18-окт-2013 | Часопис: | IYCE 2013 - 4th International Youth Conference on Energy | Сажетак: | This paper discuss PI controller optimization methods procedure. In its nature PI controller is a simple yet effective method for achieving desired reference, but tuning of the same is entirely different concept. There are numerous different methods for tuning a PI controller. Some optimizing one concept of control, i.e. current overshoot, other targeting different areas, i.e. settling time. Even with most advanced methods, sometimes, response has some unfavorable features. Sometimes PI tuning can require manual inputs, to lessen those inconveniences. Other times though, some tuning methods can prove to have better responses on the actual system than during simulations. Where better performances would be expected, sometimes, some unfavorable features can surface. This paper aims to show simulation and experimental comparison between two standard PI controller tuning methods. Methods were tested in Laboratory for Power electronic and electrical drives at Faculty of Technical Sciences. © 2013 IEEE. | URI: | https://open.uns.ac.rs/handle/123456789/8607 | ISBN: | 9781467355568 | DOI: | 10.1109/IYCE.2013.6604158 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
8
проверено 09.09.2023.
Преглед/и станица
23
Протекла недеља
7
7
Протекли месец
4
4
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.