Comparison of LTCC inductors on different substrate configurations with PCB inductor

Abstract

Purpose - This paper presents performance comparison of RF inductors with the same lateral geometry applying different substrate configurations. The purpose of presented research is to demonstrate and verify some advantages of low temperature co-fired ceramic (LTCC) technology in comparison to printed circuit board (PCB) technology based on the performance analysis of presented inductors in lower RF range. Design/methodology/approach - The presented inductors are meander structures fabricated in LTCC and PCB technology, with same line width and outer dimensions. Performance analysis of all configurations is based on measurement results and numerical simulations. Advantage of LTCC technology is demonstrated by application of substrate pattering in order to maintain and/or improve expected inductor performances. Findings - As expected, obtained results for the inductor with an air-gap show increase of the quality factor over 30 percent and widening of the operating frequency range by 50 percent when compared with the same LTCC structure without a gap. But what is more important the inductor with airgap embedded inside LTCC stack maintains efficiency when compared to PCB inductor. This fact offers possibility of integration good quality components inside LTCC stack and reduction of used chip space. Originality/value - Advantages of LTCC with respect to PCB design are demonstrated by efficiency increase of the proposed inductor configurations by means of design optimization relying on substrate pattering and incensement of the packaging density by embedding inductors. The presented findings are verified through consistency of measurement results and simulated data. © Emerald Group Publishing Limited.