Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/8142
Назив: | Ink-jet printed strain sensor on polyimide substrate | Аутори: | Žlebič, Čedo Kisić, Milica Blaž N. Menićanin A. Kojić, Stevan Živanov L. Damnjanović, Mirjana |
Датум издавања: | 1-дец-2013 | Часопис: | Proceedings of the International Spring Seminar on Electronics Technology | Сажетак: | This paper describes a method for measuring strain on a specimen with flexible strain sensor. The sensor is made by ink-jet printing of silver ink on polyimide substrate, in that manner providing a combination of electrical conductivity and mechanical flexibility. When a force is applied on the free end of cantilever beam, three different strain gauges are used to measure flex of the beam. The gauge is taped at the fixed end of the beam, on the top side. To determine the strain, it requires accurate measurement of small resistance change, therefore strain gauge is connected to the Source Meter Keithley 2410. This work will consolidate the research on theoretical, technological and experimental aspect of design, development and validation of resistive sensors that are flexible, bendable and stretchable. © 2013 IEEE. | URI: | https://open.uns.ac.rs/handle/123456789/8142 | ISBN: | 9781479900367 | ISSN: | 21612528 | DOI: | 10.1109/ISSE.2013.6648283 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
8
проверено 09.09.2023.
Преглед/и станица
27
Протекла недеља
4
4
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.