Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/8141
Nаziv: | Design and simulation of 13.56 MHz RFID tag in ink-jet printing technology | Аutоri: | Kisić, Milica Dakic B. Damnjanović, Mirjana Menicanin A. Blaz N. Zivanov L. |
Dаtum izdаvаnjа: | 1-дец-2013 | Čаsоpis: | Proceedings of the International Spring Seminar on Electronics Technology | Sažetak: | This paper presents design, modeling and simulation cost-effective RFID (Radio Frequency Identification) tag using ink-jet printing technology. Passive 13.56 MHz RFID tag is based on an inductive-capacitive resonant circuit. Designed RFID tag is part of the ID (Identification) card, which has standard ISO ID1 size (85.60 mm × 53.98 mm). It consists of rectangular spiral planar inductor (antenna) and interdigital capacitor. The modeling and optimization of RFID tag are discussed. At the first step, inductor and capacitor were designed using in-house developed simulation tools AntInd and INDICON, respectively, in order to provide proper electrical characteristics of tag. After that, the designed geometrical structures are modeled and simulated using CST Microwave Studio software. A radiation pattern at operational frequency of 13.56 MHz simulated in CST of the RFID tag insulated in free spaces is presented. © 2013 IEEE. | URI: | https://open.uns.ac.rs/handle/123456789/8141 | ISBN: | 9781479900367 | ISSN: | 21612528 | DOI: | 10.1109/ISSE.2013.6648254 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
11
prоvеrеnо 03.05.2024.
Prеglеd/i stаnicа
17
Prоtеklа nеdеljа
1
1
Prоtеkli mеsеc
2
2
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.