Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/791
Назив: | Knoop hardness optimal loading in measuring microhardness of maraging steel obtained by selective laser melting | Аутори: | Baloš, Sebastian Rajnović, Dragan Sidjanin L. Kostić, Marko Bogojevic N. Pećanac, Milan Pavlicevic J. |
Датум издавања: | 1-јан-2019 | Часопис: | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | Сажетак: | © IMechE 2019. Knoop microhardness method possesses several advantages over Vickers testing: lower penetration depth, higher accuracy in indentation measurement, and a better suitability to measuring thin and elongated morphological features. This study explores the optimal loading and load independent hardness of selective laser melted specimens in non-heat-treated and heat-treated conditions, by using different Knoop test loads. The obtained results were used to plot load to indentation size charts, which, in turn, were used to obtain prediction curves in accordance to Meyer, proportional specimen resistance, and modified proportional specimen resistance models. The fitting of fitting curves to the measured values was used to calculate appropriate correlation factors. The results indicate that indentation size effect occurs in all measured specimens. This suggests that there is material true microhardness. Also, the most adequate model was modified proportional specimen resistance, with correlation factors just under one. | URI: | https://open.uns.ac.rs/handle/123456789/791 | ISSN: | 9544062 | DOI: | 10.1177/0954406219841081 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
1
проверено 29.04.2023.
Преглед/и станица
29
Протекла недеља
5
5
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.