Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/7771
Nаziv: | Model testing of fixture-workpiece interface compliance in dynamic conditions | Аutоri: | Tadic B. Vukelić, Đorđe Miljanic D. Bogdanovic B. Macuzic I. Budak, Igor Todorovic P. |
Dаtum izdаvаnjа: | 1-јан-2014 | Čаsоpis: | Journal of Manufacturing Systems | Sažetak: | This paper is focused on the problem of compliance of interface between clamping/locating fixture elements and workpiece, under dynamic loads during machining. In contrast to previous investigations, the authors have developed a special device dedicated to testing of physical models which represent clamping/locating elements and workpiece. This device allows optimization of a large number of input parameters which are critical to interface compliance. It was used in experimental investigations to establish the impact that the radius of the spherical tip of a clamping/locating element has on the interface compliance and load capacity. The results of experimental investigation show that, under certain conditions, the clamping/locating elements with larger-radius spherical tips provide significantly lower interface compliance. Future investigations should be aimed at finding optimum macro- and micro-geometries of contact interface, as well as the selection of materials for clamping/locating elements. © 2013 The Society of Manufacturing Engineers. | URI: | https://open.uns.ac.rs/handle/123456789/7771 | ISSN: | 2786125 | DOI: | 10.1016/j.jmsy.2013.05.004 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
19
prоvеrеnо 20.05.2023.
Prеglеd/i stаnicа
26
Prоtеklа nеdеljа
8
8
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.