Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/7438
Nаziv: | Dependence of interfacial heat transfer coefficient on casting surface temperature during solidification of Al-Si alloy castings cast in CO2 sand mold | Аutоri: | Kovačević, Lazar Terek, Pal Miletić, Aleksandar Kakaš D. |
Dаtum izdаvаnjа: | 1-јан-2014 | Čаsоpis: | Heat and Mass Transfer/Waerme- und Stoffuebertragung | Sažetak: | Interfacial heat transfer coefficient at the metal-mold interface (IHTC) was estimated by an iterative algorithm based on the function specification method. An Al-9 wt% Si alloy plate casting was made in a sand mold prepared by CO2 process. Thermal history obtained from the experiment was used to solve an inverse heat conduction problem. Acquired transient IHTC values are then given in function of the casting surface temperature at the interface. By comparing the obtained results with previous findings, the influence of grain fineness number and consequently of mold roughness on maximum IHTC values is revealed. © 2014 Springer-Verlag Berlin Heidelberg. | URI: | https://open.uns.ac.rs/handle/123456789/7438 | ISSN: | 9477411 | DOI: | 10.1007/s00231-014-1326-0 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
5
prоvеrеnо 29.04.2023.
Prеglеd/i stаnicа
37
Prоtеklа nеdеljа
8
8
Prоtеkli mеsеc
4
4
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.