Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/6713
Назив: | Reheating of zinc-titanate sintered specimens | Аутори: | Labus N. Mentus S. Rakić, Srđan Đurić Z. Vujančević J. Nikolić M. |
Датум издавања: | 1-јан-2015 | Часопис: | Science of Sintering | Сажетак: | © 2015 International Institute for the Science of Sintering (IISS). All rights reserved. The scope of this work was observing dimensional and heat transfer changes in ZnTiO<inf>3</inf> samples during heating in nitrogen and air atmosphere. Interactions of bulk specimens with gaseous surrounding induce microstructure changes during heating. Sintered ZnTiO<inf>3</inf> nanopowder samples were submitted to subsequent heating. Dilatation curves and thermogravimetric with simultaneous differential thermal analysis TGA/DTA curves were recorded. Reheating was performed in air and nitrogen atmospheres. Reheated samples obtained at different characteristic temperatures in air were analyzed by X-ray diffraction (XRD). Microstructures obtained by scanning electron microscopy (SEM) of reheated sintered samples are presented and compared. Reheating in a different atmosphere induced different microstructures. The goal was indicating possible causes leading to the microstructure changes. | URI: | https://open.uns.ac.rs/handle/123456789/6713 | ISSN: | 0350820X | DOI: | 10.2298/SOS1501071L |
Налази се у колекцијама: | PMF Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
4
проверено 12.08.2023.
Преглед/и станица
9
Протекла недеља
5
5
Протекли месец
1
1
проверено 03.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.