Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/6538
Title: | Influence of DC bias on the electrical characteristics of SMD inductors | Authors: | Žlebič, Čedo Kljajić, Dragan Blaz N. Zivanov L. Menicanin A. Damnjanović, Mirjana |
Issue Date: | 1-Jan-2015 | Journal: | IEEE Transactions on Magnetics | Abstract: | © 1965-2012 IEEE. As the dc bias flows through a ferrite chip surface mount device (SMD) inductor, it tends to premagnetize the core and reduce its inductance and impedance. It is observed that this drop is especially emphasized when the dc current exceeds the safety limit given by the manufacturer. Therefore, it is necessary to investigate and predict the degree of electrical characteristics degradation as well as the dependence of the core losses on core temperature. In this paper, a measurement technique for the investigation of the influence of dc bias on the electrical characteristics of SMD inductors (i.e., inductance, resistance, Q factor, and real and imaginary part of impedance) for printed circuit board applications is presented. Analysis is based on the model of the SMD inductor, which can be presented as a two-port equivalent circuit with intrinsic and extrinsic parameters. For calculation of the parameters of the SMD inductor, extracted from measured S-parameters using vector network analyzer, the in-house software tool IndCalc was used. | URI: | https://open.uns.ac.rs/handle/123456789/6538 | ISSN: | 189464 | DOI: | 10.1109/TMAG.2014.2356253 |
Appears in Collections: | FTN Publikacije/Publications |
Show full item record
SCOPUSTM
Citations
8
checked on Sep 9, 2023
Page view(s)
20
Last Week
3
3
Last month
5
5
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.