Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/5876
Nаziv: | Evaluating minimum zone flatness error using new method - Bundle of plains through one point | Аutоri: | Radlovački V. Hadžistević, Miodrag Štrbac, Branko Delić, Milan Kamberović, Bato |
Dаtum izdаvаnjа: | 1-јан-2016 | Čаsоpis: | Precision Engineering | Sažetak: | © 2015 Elsevier Inc. All rights reserved. An attempt was made to create a new software solution for evaluating minimum zone (MZ) based flatness error using data acquired from a coordinate measuring machine (CMM). The authors tried to exploit one very useful characteristic of a reference plane for evaluating flatness error. Namely, it is shown that only one point located within a "cloud" of points can be used to generate reference planes for the purpose of evaluating flatness error. The method is named One Point Plane Bundle Method (OPPBM). A solution was created using exclusively basic analytic geometry relations/transformations and a general purpose worksheet tool. The results show that this solution can be used to determine very usable MZ flatness error values, which are significantly lower than values provided by the least square method. Execution times are also reasonable and acceptable. The method has been validated using the data from reference literature and experimental data measured by a CMM. | URI: | https://open.uns.ac.rs/handle/123456789/5876 | ISSN: | 1416359 | DOI: | 10.1016/j.precisioneng.2015.10.002 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
12
prоvеrеnо 14.09.2022.
Prеglеd/i stаnicа
30
Prоtеklа nеdеljа
8
8
Prоtеkli mеsеc
2
2
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.