Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/4392
Nаziv: | Influence of starting powder milling on structural properties, complex impedance, electrical conductivity and permeability of Mn–Zn ferrite | Аutоri: | Milutinov, Miodrag Nikolić M. Lukovic M. Blaž, Nelu Labus N. Živanov, Ljiljana Aleksić O. |
Dаtum izdаvаnjа: | 1-нов-2016 | Čаsоpis: | Journal of Materials Science: Materials in Electronics | Sažetak: | © 2016, Springer Science+Business Media New York. In this work we have analyzed how milling starting commercial Mn–Zn powder prior to the sintering process has an influence on electrical conductivity, relative permittivity and complex impedance in the frequency range from 100 Hz to 1 GHz and relative permeability in the frequency range 1–500 MHz. Starting powders additionally were milled for 30, 60, 120 and 240 min followed by sintering disk samples between 900 and 1300 °C. Structural properties were analyzed using XRD and SEM analysis. Milling the starting powder reduced grain and crystallite size, but longer milling leads to agglomeration and consequently an inhomogeneous microstructure that was more expressed at higher sintering temperatures. Milling the starting powder improved relative permeability, reaching a maximum for samples of starting powder milled for 60 min and sintered at 1200 °C. | URI: | https://open.uns.ac.rs/handle/123456789/4392 | ISSN: | 09574522 | DOI: | 10.1007/s10854-016-5328-1 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
2
prоvеrеnо 15.03.2024.
Prеglеd/i stаnicа
15
Prоtеklа nеdеljа
12
12
Prоtеkli mеsеc
1
1
prоvеrеnо 03.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.