Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/3998
Назив: | An ink-jet printed capacitive sensor for angular position/velocity measurements | Аутори: | Krklješ D. Stojanović, Goran |
Датум издавања: | 1-јан-2016 | Часопис: | Advances in Electrical and Computer Engineering | Сажетак: | © 2016 AECE. This paper presents the prototype of a capacitive angular position/velocity sensor which exploits the advantages of flexible/printed electronics. The sensor belongs to the incremental encoder type with two quadrature channels. Instead of the commonly used structure of planar capacitor, in this paper a cylindrical capacitor structure with digitated electrodes, for both the stator and the rotor, was implemented. The flexible printed electrodes are attached to the inner wall of the stator and to the perimeter of the rotor cylinder. The rotor has no external contacts; electrical connection is established with the stator only. The working principles of the sensor and the signal conditioning circuit were demonstrated through experimental results based on in-house developed mechanical and electronics platforms. | URI: | https://open.uns.ac.rs/handle/123456789/3998 | ISSN: | 15827445 | DOI: | 10.4316/AECE.2016.04012 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
3
проверено 10.05.2024.
Преглед/и станица
15
Протекла недеља
1
1
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.