Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/3894
Назив: | Influence of different substrates' thickness on the performance of inkjet printed CPW inductors | Аутори: | Menicanin A. Zivanov L. Damnjanović, Mirjana Blaz N. Marić, Andrea |
Датум издавања: | 2-јул-2016 | Часопис: | Mediterranean Microwave Symposium | Сажетак: | © 2016 IEEE. In this paper, influence of different substrates' thickness on coplanar waveguide (CPW) inductors for high frequency applications is presented. The designed CPW inductors are two-port meanders with one turn and outer dimension 1.8 mm × 2.0 mm. CPW inductors were made in inkjet printing technology with nanoparticle ink which contain 20 wt% of silver. CPW inductors are fabricated on substrates with 25, 50, 75 and 125 μm thicknesses. The measured response characteristics are in excellent agreement with the predicted simulation response. The best values of inductance and Q-factor were obtained with 125 μm thickness of substrate (L=2.269 nH and Q≡5). | URI: | https://open.uns.ac.rs/handle/123456789/3894 | ISBN: | 9781509025862 | ISSN: | 21579822 | DOI: | 10.1109/MMS.2016.7803874 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
Преглед/и станица
13
Протекла недеља
3
3
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.