Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/359
Назив: | Evolutionary optimization of jet lag in the abrasive water jet machining | Аутори: | Gostimirović, Marin Pucovsky V. Sekulić, Mirjana Rodić, Dragan Pejic V. |
Датум издавања: | 19-апр-2019 | Часопис: | International Journal of Advanced Manufacturing Technology | Сажетак: | © 2018, Springer-Verlag London Ltd., part of Springer Nature. One of the main characteristics of abrasive water jet machining (AWJM) is jet lag effect. In this case, by controlling basic machining parameters (water pressure, cutting speed, and abrasive mass flow rate), evolutionary algorithm is used for modeling and optimization of trajectory curvature in AWJM process. Based on experimental investigation, genetic programming was used as the main exploration tool for generating function of the jet lag depending on the machining conditions and as a potential way in the AWJM simulation. Judging by the output, the genetic programming yielded impressive results and has proven to be very practical for modeling of the abrasive water jet trajectory curvature. In the sequel, the optimization of AWJM process is used approximate optimal control problem which leads to the best solution for the jet lag considering the machining parameters. With this action, we can say that different access has been made to find precise dependence of AWJM process parameters with the trajectory curvature to obtain high productivity and quality results. | URI: | https://open.uns.ac.rs/handle/123456789/359 | ISSN: | 2683768 | DOI: | 10.1007/s00170-018-3181-5 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
20
проверено 29.04.2023.
Преглед/и станица
31
Протекла недеља
4
4
Протекли месец
4
4
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.