Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/3578
Назив: | Fabrication of digital anamorphic sculptures with industrial robot | Аутори: | Jovanović, Marko Tasevski, Jovica Tepavčević, Bojan Raković, Mirko Mitov, Dejan Borovac, Branislav |
Датум издавања: | 1-јан-2017 | Часопис: | Advances in Intelligent Systems and Computing | Сажетак: | © Springer International Publishing AG 2017. The fabrication process of complex architectural designs in the real world requires precise and complex movements in the workspace. The robotic arms can fulfil this requirement, which makes them an excellent choice for a set of digital fabrication tasks. This paper presents a design methodology for the generation of anamorphic sculptures based on input grayscale image. To represent pixels in real world, wooden sticks are used. The colour of a grayscale image is represented by setting the appropriate orientation of the wooden sticks with respect to the initial vertical position. To achieve good results a large number of sticks is required to be placed and oriented precisely. In order to do this, the holes are drilled at a specified angle in a wooden base. Drilling is carried out with a driller mounted on a ABB IRB140 robot arm. After the drilling is finished, wooden sticks are manually placed in each hole. | URI: | https://open.uns.ac.rs/handle/123456789/3578 | ISBN: | 9783319490571 | ISSN: | 21945357 | DOI: | 10.1007/978-3-319-49058-8_62 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
2
проверено 10.05.2024.
Преглед/и станица
42
Протекла недеља
7
7
Протекли месец
4
4
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.