Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/3566
Nаziv: | Vibration based broken bar detection in induction machine for low load conditions | Аutоri: | Matić, Dragan Kanović, Željko |
Dаtum izdаvаnjа: | 1-јан-2017 | Čаsоpis: | Advances in Electrical and Computer Engineering | Sažetak: | A new method for broken bar detection, based on vibration signal analysis, is presented in this paper. While there are several methods for broken bar detection at low slip based on the current signal analysis, detection based on vibration signals attracts much less attention. In the current paper, detection of the broken bar was conducted by observing fault frequency content of the modulus of the analytical vibration signal. A broken bar feature is extracted from low frequency range even for low slip conditions. Although this method is successfully used for broken bar detection based on current signal analysis, it is important to verify the method when vibration signal is measured. Procedure is verified in a real industrial environment for induction motor of 3.15 MW. | URI: | https://open.uns.ac.rs/handle/123456789/3566 | ISSN: | 15827445 | DOI: | 10.4316/AECE.2017.01007 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
11
prоvеrеnо 10.05.2024.
Prеglеd/i stаnicа
33
Prоtеklа nеdеljа
9
9
Prоtеkli mеsеc
6
6
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.