Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/3148
Назив: | Simulation study on the motion of a Canfield joint type-based snake-like robot | Аутори: | Lu Z. Xie Y. Branislav B. Li B. |
Датум издавања: | 1-јул-2017 | Часопис: | Gaojishu Tongxin/Chinese High Technology Letters | Сажетак: | © 2017, Executive Office of the Journal. All right reserved. A motion mechanism model based on Canfied joints was established by using the dynamic simulation software of the virtual robot experimentation platform (V-REP), and the trajectory in its motion space was observed and analyzed by adding joint degree constraints. The Canfield mechanism model was taken as a joint module to establish a snake-like robot model. The gaits of serpentine, turning and concertina gaits created by controlling the joint motion of the snak-like robot, were studied and analyzed through gaits experiments, with the aim of providing the feasibility of designing this type of snake-like robots. | URI: | https://open.uns.ac.rs/handle/123456789/3148 | ISSN: | 10020470 | DOI: | 10.3772/j.issn.1002-0470.2017.07.008 |
Налази се у колекцијама: | Naučne i umetničke publikacije |
Приказати целокупан запис ставки
Преглед/и станица
40
Протекла недеља
10
10
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.