Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/3040| Title: | Spiral inductor fabricated by 3D additive manufacturing | Authors: | Menicanin A. Zivanov L. Movrin, Dejan Blaz N. |
Issue Date: | 3-Aug-2017 | Journal: | Proceedings of the International Spring Seminar on Electronics Technology | Abstract: | © 2017 IEEE. This paper presents spiral inductor fabricated by 3D additive manufacturing. The inductor was made with conductive epoxy silver based paste which was injected in spiral channel fabricated in polylactide (PLA) substrate (model) using additive manufacturing technology. The fabricated structure has value of effective inductance around 415 nH, maximum quality factor around 12 and outer dimension diameter 24 mm. The prototype results show good characteristics of 3D additive manufactured spiral inductor and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor. | URI: | https://open.uns.ac.rs/handle/123456789/3040 | ISBN: | 9781538605820 | ISSN: | 21612528 | DOI: | 10.1109/ISSE.2017.8001007 |
| Appears in Collections: | FTN Publikacije/Publications |
Show full item record
SCOPUSTM
Citations
1
checked on May 10, 2024
Page view(s)
21
Last Week
2
2
Last month
10
10
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.