Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/3037
Назив: | Fully ink-jet printed capacitive pressure sensor | Аутори: | Kisić, Milica Blaz N. Žlebič, Čedo Zivanov L. Nikolić, Ivan |
Датум издавања: | 3-авг-2017 | Часопис: | Proceedings of the International Spring Seminar on Electronics Technology | Сажетак: | © 2017 IEEE. In this paper a capacitive pressure sensor with two flexible membranes is presented. The sensor consists of two electrodes on membranes, a spacer and an additional dielectric layer between the electrodes. The sensor is fully printed in an ink-jet printing technology using a nanoparticle silver ink. The polyimide foils are used as membranes, a spacer of the sensor and a dielectric isolation layer. With the pressure applied on the electrodes, the polyimide membranes deflect reducing distance between the electrodes and therefore increasing the capacitance of the sensor which serves as a measure of the pressure applied on the sensor. The fabricated sensor is tested and the measured characteristic of the sensor is presented. The pressure is measured up to 1 bar and the obtained sensitivity of the proposed sensor is 16.7 pF/bar. | URI: | https://open.uns.ac.rs/handle/123456789/3037 | ISBN: | 9781538605820 | ISSN: | 21612528 | DOI: | 10.1109/ISSE.2017.8000994 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
1
проверено 10.05.2024.
Преглед/и станица
13
Протекла недеља
2
2
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.