Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/15625
Nаziv: | Conservative-force-controlled feed drive system for down milling | Аutоri: | Tadic B. Vukelić, Đorđe Hodolic J. Mitrović, Slobodan Eric M. |
Dаtum izdаvаnjа: | 30-мај-2011 | Čаsоpis: | Strojniski Vestnik/Journal of Mechanical Engineering | Sažetak: | Reviewed in this paper are the results of theoretical and experimental investigation of a novel down milling method. The method is based on controlling feed speed using conservative forces, where the active force which provides motion is the horizontal component of the cutting force. Feed motion is therefore realized without any active forces (active drive systems), while the feed speed is regulated by precision breaking of the workpiece, which is possible through hydraulic damping. In addition to the basic theoretical model of the feed drive system, the paper also presents the dynamic model of the drive system, taking into consideration fluid compressibility. Based on the model proposed, a physical instance of the feed drive system was designed, built and tested. The results of preliminary experimental investigation speak in favour of the proposed theoretical model, which enables practical application of this type of feed drive systems. © 2011 Journal of Mechanical Engineering. All rights reserved. | URI: | https://open.uns.ac.rs/handle/123456789/15625 | ISSN: | 392480 | DOI: | 10.5545/sv-jme.2009.055 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
8
prоvеrеnо 20.05.2023.
Prеglеd/i stаnicа
27
Prоtеklа nеdеljа
15
15
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.