Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/1448
Title: | Evaluation of residual stresses after irregular interrupted machining | Authors: | Malotova S. Cep R. Zlamal T. Mohyla P. Czán A. Antić, Aco Budak, Igor Mircea L. |
Issue Date: | 1-Aug-2018 | Journal: | Tehnicki Vjesnik | Abstract: | © 2018, Strojarski Facultet. All Rights reserved. Residual stress occurs in many machined components and parts. Over time, several methods have been developed for the investigation of residual stress in the material – destructive and non-destructive. This article deals with the evaluation and comparison of residual stress in the material when machining steel C45 and 11CrMo9-10, when the tool enters into the cut and stands out in conditions of an interrupted cut. A non-destructive method, based on X-Ray diffraction, was applied to evaluate the residual stress. The points were measured on the last machined slat by using interrupted cut simulator. An irregular interrupted cut was achieved by gradually machining 4, 3, 2 and 1 slat. The experiments were realized in co-operation with the Faculty of Mechanical Engineering, VSB – Technical University of Ostrava, Czech Republic and the Faculty of Mechanical Engineering, the University of Žilina, Slovakia. | URI: | https://open.uns.ac.rs/handle/123456789/1448 | ISSN: | 13303651 | DOI: | 10.17559/TV-20160615125650 |
Appears in Collections: | FTN Publikacije/Publications |
Show full item record
SCOPUSTM
Citations
6
checked on May 3, 2024
Page view(s)
19
Last Week
7
7
Last month
0
0
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.