Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/14009
Назив: | Microstructure and fracture of alloyed austempered ductile iron | Аутори: | Erić O. Rajnović, Dragan Zec S. Sidjanin L. Jovanović M. |
Датум издавања: | 1-јан-2006 | Часопис: | Materials Characterization | Сажетак: | An investigation has been conducted on two austempered ductile irons alloyed with Cu and Cu + Ni, austenitized at 900 °C and austempered at 350 °C. The microstructure and fracture mode developed through these treatments have been identified by means of light and scanning electron microscopy and X-ray diffraction analysis. Impact energy measurements were performed on un-notched Charpy specimens. The maximum value of retained austenite volume fraction observed in the material alloyed with Cu + Ni was higher than in that alloyed with Cu austenitized and austempered under the same conditions. This led to the material alloyed with Cu + Ni having higher impact energy and substantial plastic deformation. © 2006 Elsevier Inc. All rights reserved. | URI: | https://open.uns.ac.rs/handle/123456789/14009 | ISSN: | 10445803 | DOI: | 10.1016/j.matchar.2006.01.014 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
71
проверено 10.05.2024.
Преглед/и станица
18
Протекла недеља
6
6
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.