Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/13135
Nаziv: | The influence of polymer addition on flexural strength, fracture mode and porosity of traditional ceramics | Аutоri: | Rajnović, Dragan Baloš, Sebastian Sidjanin L. Radeka, Miroslava Petrovic S. Zoric D. Ranogajec, Jonjaua |
Dаtum izdаvаnjа: | 11-јул-2011 | Čаsоpis: | Chemical Industry and Chemical Engineering Quarterly | Sažetak: | The usage of air-swept milling of raw materials is the most efficient method for preventing the negative lime-blowing process of ceramic roofing tiles. However, after air-swept milling the clay minerals lose water which has to be returned back before the shaping procedure. Addition of surface active materials could increase hydrophilicity of the raw material and reduce needed time for re-wetting trough the control of meso-, micro- and nanoporosity of the clay material. In view of that, the object of this research was to study the influence of polyethylene glycol (PEG600) on porosity, mechanical properties and fracture surface characteristics of traditional ceramic materials. It was founded that with the addition of polyethylene glycol (PEG600) to traditional clay materials it is possible to achieve desired porosity, from meso, through micro and up to nano, without degrading the mechanical properties of the final products. | URI: | https://open.uns.ac.rs/handle/123456789/13135 | ISSN: | 14519372 | DOI: | 10.2298/CICEQ101119007R |
Nаlаzi sе u kоlеkciјаmа: | TF Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
3
prоvеrеnо 03.05.2024.
Prеglеd/i stаnicа
34
Prоtеklа nеdеljа
11
11
Prоtеkli mеsеc
4
4
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.