Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/13135
Назив: | The influence of polymer addition on flexural strength, fracture mode and porosity of traditional ceramics | Аутори: | Rajnović, Dragan Baloš, Sebastian Sidjanin L. Radeka, Miroslava Petrovic S. Zoric D. Ranogajec, Jonjaua |
Датум издавања: | 11-јул-2011 | Часопис: | Chemical Industry and Chemical Engineering Quarterly | Сажетак: | The usage of air-swept milling of raw materials is the most efficient method for preventing the negative lime-blowing process of ceramic roofing tiles. However, after air-swept milling the clay minerals lose water which has to be returned back before the shaping procedure. Addition of surface active materials could increase hydrophilicity of the raw material and reduce needed time for re-wetting trough the control of meso-, micro- and nanoporosity of the clay material. In view of that, the object of this research was to study the influence of polyethylene glycol (PEG600) on porosity, mechanical properties and fracture surface characteristics of traditional ceramic materials. It was founded that with the addition of polyethylene glycol (PEG600) to traditional clay materials it is possible to achieve desired porosity, from meso, through micro and up to nano, without degrading the mechanical properties of the final products. | URI: | https://open.uns.ac.rs/handle/123456789/13135 | ISSN: | 14519372 | DOI: | 10.2298/CICEQ101119007R |
Налази се у колекцијама: | TF Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
3
проверено 03.05.2024.
Преглед/и станица
34
Протекла недеља
11
11
Протекли месец
4
4
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.