Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/13049
Title: | Comparative characteristics of ductile iron and austempered ductile iron modeled by neural network | Authors: | Savković, Borislav Kovac P. Dudic B. Gregus M. Rodic D. Štrbac, Branko Ducic N. |
Issue Date: | 1-Sep-2019 | Journal: | Materials | Abstract: | © 2019 by the authors. Experimental research of cutting force components during dry face milling operations are presented in the paper. The study was provided when milling of ductile cast iron alloyed with copper and its austempered ductile iron after the proper austempering process. In the study, virtual instrumentation designed for cutting forces components monitoring was used. During the research, orthogonal cutting forces components versus time were monitored and relationship of cutting forces components versus speed, feed and depth of cut were determined by artificial neural network and response surface methodology. An analysis was made regarding the consistency of the measured cutting forces and the values obtained from the model supported by an artificial neural network for the investigated interval of the cutting regime. Based on the results, an analysis of the feasibility of the application of austempered ductile iron in the industrial sector with the aspect of machinability as well as the application of the models based on artificial intelligence, was given. At the end of the presentation, the influence of the aforementioned cutting regimes on cutting force components is presented as well. | URI: | https://open.uns.ac.rs/handle/123456789/13049 | DOI: | 10.3390/ma12182864 |
Appears in Collections: | FTN Publikacije/Publications |
Show full item record
SCOPUSTM
Citations
11
checked on Apr 29, 2023
Page view(s)
21
Last Week
13
13
Last month
0
0
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.